Always Do This Before Buying a Used Car
Considering buying a used car? Follow this four-step inspection program to determine the vehicle's reliability, condition and value.
Tips For Buying a Used Car: 4 Things You Must Do Before You Buy
Family and friends used to ask me if a certain vehicle was “a good one” only after they’d bought it. Hello? What am I supposed to say then?
Buying a dependable used car takes a little bit of homework. Here are four tips for buying a used car that will increase your odds of getting a car that won’t turn into a money pit. (Speaking of which, here are seven ways you’re wasting money on your car.) This step-by-step inspection program works whether you’re buying from a car lot or a private party. It’s not rocket science, just simple logic.
This story isn’t about cosmetic issues like rust, body dents or dirty carpets. Plus, I’m assuming you’re buying a vehicle that’s out of the factory warranty period.
Step 1: Check the Used Vehicle’s Reliability on the Internet
Once you decide on a few vehicle models you’re interested in, it’s time to begin your research in online forums such as edmunds.com and automotiveforums.com. These are two websites where you can read comments and ask questions of a pool of thousands of people who actually own that vehicle. Review the owners’ comments and ask about their ownership experience. Find out if there are any recurring problems with that year, make and model and how much the owners have shelled out in repairs. Then ask whether they’d buy the same vehicle again. They’ll give you straight answers. Some forum members respond immediately, but be patient; it might take a few days to get plenty of responses.
Meanwhile, check out rockauto.com‘s “Repair Index” to compare repair parts costs. You may find, for example, that a certain European sedan’s alternator replacement could cost upward of $800, whereas the same item for a similar domestic model is relatively cheap at $150. When you’re buying a used vehicle, parts cost is a major concern. (Here’s the real reason you shouldn’t use cheap auto parts.)
Step 2: Inspect the Used Car Before Taking a Test Drive
Check the dash lights. Turn the key to the “run” position. The Check Engine (Service Engine Soon), Airbag (SRS), Antilock brakes (ABS), Antitheft (Security), and traction control lights must come on. After you start the engine, all those lights should go off. (Take this dashboard warning light quiz to see how well you know your display.)
Check the tires. If you see cracks in the tread or sidewall areas, or notice any steel wires sticking out, you’ll need new tires immediately. So deduct at least $450 from the seller’s asking price (more for truck or SUV tires).
Next, use a tread depth gauge (less than $5 at any auto parts store) to check the tread at the edges and centre of the tire. (This 60-second tire test could also come in handy.)
Tread wear that’s worse on one edge of the tire indicates an alignment problem (minimum $100). Irregular tread depth around the tire (cupping) indicates worn struts or worn suspension components (strut replacement runs about $450 for parts and labour).
Check the constant velocity (CV) boots. If they’re cracked, you’re looking at big money, at least $400 per side (parts and labour) for rebuilt axle assemblies.
Check for engine sludge or severe varnish buildup. Both are signs of neglected maintenance. Remove the oil filler cap and check the engine internals.
A cold engine should start right away, without having to “give it some gas.” Then it should settle down to a smooth idle. If the idle is rough when the engine is warm, it’s a sign of a fuel, ignition or vacuum-related problem. (Here’s helpful advice on how to find a vacuum leak.) That’s going to cost a minimum of $250 to diagnose and fix.
Check the fluids:
- Fresh brake fluid is honey-coloured. But dark brown brake fluid may still be good. Your best bet is to buy brake fluid test strips at an auto parts store. Count on $65 for a brake fluid flush. (Here are step-by-step instructions for checking the fluids in your vehicle.)
- Engine coolant comes in many different colours, but one colour is the kiss of death—rust. If you see that, run, don’t walk, away from this vehicle. You’ll have nothing but costly repairs (radiator, heater core, water pump, etc.) down the road. Flushing the coolant at this point won’t help because the damage has already been done.
- Fresh transmission fluid is bright red. If it’s light brown, it’s due for a change (figure about $175 for a complete change-out with the manufacturer’s fluid). If the vehicle doesn’t have a dipstick, have your mechanic check it at final inspection.
If the owner has maintenance records, great. It probably means that they took good care of their car. Then check the maintenance schedule in the glove box to see if any major repairs are looming. A timing belt change-out can easily cost $500, and a tune-up can cost $250 on some engines. If the owner already did those repairs, great. But if they didn’t, you’ll get stuck with a large bill right away.
If you’re up to the challenge, here are 100 car repairs you can do on your own.
Step 3: Take the Used Car on a Test Drive
This isn’t a “once around the block,” 10-minute drive. You need to really put the used car through its paces on city streets and on the highway. Here’s what to look for:
- As you start the test drive, check for brake pedal pulsation. Pulsation is caused by brake rotor runout (warpage), and the fix is usually a brake job ($250 to $500). Pulsation shouldn’t kill the deal, but it should reduce your offering price.
- Check for steering wheel wobble and wander. If the wheel vibrates, the cause could be an out-of-balance tire (about $25). But if the vehicle “wanders” and the steering wheel requires constant correction, it’s a sign of serious steering or suspension-related problems (minimum $400 for parts and labour).
- Check transmission shift speeds. Every transmission is different, but as a general rule, the first (1-2) shift should occur at 13 to 20 km/h. The next shift (2-3) should happen at about 30 to 40 km/h. If the vehicle has overdrive, the last shift should occur at about 65 km/h. If you have any doubts about the shifting, ask your mechanic to check it out.
- Check overall engine performance. Accelerate from a stop without letting up. You shouldn’t feel any hesitation, chugging or hiccups. Then put it under a heavy load by driving it up a steep hill or punching it hard on the highway. You shouldn’t feel any miss or lag. If you do, it’s got “driveability” issues, and that’ll cost you a minimum of $100 just to get a scan tool check.
Considering buying new? This is the best time to buy a new car.
Step 4: Take the Used Car for an Inspection
Negotiate the price first, then take it to a mechanic for a final inspection.
Most mechanics charge about $100 for a used-vehicle inspection, and it’s the best money you’ll ever spend. But before you commit to the inspection, negotiate the best price based on any problems you’ve already discovered. Then make the final purchase contingent on a clean bill of health from your mechanic. Make sure the final inspection includes a scan tool check for “readiness monitors” and “pending codes.” I’m warning you—don’t skip the final inspection step just to save $100.
Next, check out some common car dealer tricks you’ll wish you knew sooner.